MSB-T-Reflex

Reflection muting actuator for SB2 and SB4 series

TECHNICAL DESCRIPTION

The muting actuators of the MSB-T-Reflex series are reflection systems including an active and a passive part (reflector). They are easy to install and practical, suitable for any application. They are specifically designed to be used with SB2-KxC and SB4-KxC barriers. Such two barriers are equipped with one single active part and one passive part (mirror); therefore the need emerges for having a completely passive part even when an integrated muting actuator is used.
The T version device sends a muting request when the package interrupts both rays of the first part of the actuator bar. After having transited beyond the barrier, the muting function is maintained active by the interruption of the two rays that are on the remaining part of the bar, therefore beyond the barrier. At this point the sequence can be reversed and the material that has passed can, if necessary, go back and repeat a reversed sequence.
The supply includes: the active bar with 4 rays, the reflector and the anchoring brackets.
The MSB-T-Reflex actuator is available in two versions: with the active side directly connected to the barrier or connected by means of a 60 cm cable with M/F connectors (MSB-T-Reflex-0,6 version)

TECHNICAL DATA